10 Startups Set To Change The Peugeot 208 Key Replacement Industry For The Better
Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working, it could be because of a dead coin-cell battery, water damage, receiver modules issues, or even a defective chip. Luckily these are all easy to fix, and you'll have your vehicle back to normal in no time at all!
The key blade could become worn out and lead to an issue with your car key. It is easy to fix if you visit your local Car Key Man Auto Locksmith and let them fit a new key blade for you.
Battery
The key fob of your Peugeot 308 may die or become weak enough to not send a strong signal. This could cause the key fob to cease working which prevents you from locking or opening the doors or even starting your engine. To fix this issue, you'll have to replace the battery inside your key fob.
You'll have to purchase a new battery from an auto parts store or your local hardware store. Make sure the battery is brand new and not stored on the shelf too long. A new battery has greater capacity and can transmit a stronger signal your car.
After replacing the battery, try unlocking the doors and locking them using the key fob. If the doors do not unlock it is most likely to be in the receiver module of the car, which can be reprogrammed by your local Peugeot dealer.
The internal chip of the key fob might be damaged. It's possible to cause damage to your key fob when you drop it on the ground, or expose it to moisture. The rubber seals that shield the chip from moisture might become worn down over time particularly if the key fob is exposed to water for prolonged period of time, like when you submerge it in the ocean at the beach. To prevent this from happening, it's important to keep your key fob safe from water and never let it come in contact with water.
Water Damage
If your key fob is wet in water, whether you dropped it into the pool or fumbled it into the puddle, don't believe it's a lost cause. The key fob is protected by rubber seals, but prolonged exposure to water may harm its electronic chip. Water is a good conductor and any water that enters the key fob could cause a series short circuits which eventually damage the electronic chip. After taking the batteries out, clean the contact surfaces with isopropyl. Dry them completely before putting them back into.
A dead battery might be the reason your Peugeot 308 won't start. Jumper cables are a great option to restart the engine in case you have an additional vehicle. If the battery is the problem then it must be replaced.
A malfunctioning receiver in the car may also hinder it from receiving the signal from the keyfob. The key fob might be damaged or there might be an issue with the antenna, wiring or the key fob itself. If you are using an entirely new key fob, it may require to be programmed into the vehicle. If you are unable to fix the issue on your own, contact a professional technician. A trained technician in the field will be able detect the issue quickly and fix it immediately.
Radio Interference
Interference can result in symptoms like a key fob that is not recognized or has a narrow range. This is either radiated or conducted, with the latter being caused by power supply cables or speaker wiring passing too close to electrical components. Usually, rerouting the cables or moving them away from these components can resolve the issue.
It's unlikely that someone is watching your key fob signal in the intention of stealing your vehicle It's possible, however, that radio interference has slowed the signal. This is a simple problem to repair.
If you're experiencing a problem with your key fobs that aren't recognized, try using a new battery. Make sure the battery is of the correct size and type. Batteries of the wrong size can damage your fob.
Certain alarm systems from the aftermarket and radar detectors use the same radio frequency as your key fob and they can cause them to interfere with your key signals. Beware of attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system of automobiles has a receiver that receives radio signals from the key fob. It will not be possible to start your vehicle if this receiver is not functioning properly even if the key fob works and can be reprogrammed. The issue could be caused by a range of causes, including a dead coin battery and water damage. The receiver may also be malfunctioning due to a software error or internal damage in the key.
One of the main reasons your Peugeot 308 key fob isn't functioning is because the coin battery inside has failed. The battery can be easily replaced, but you must ensure that it's the appropriate battery for the keyfob. It is recommended to use one that is the same size in terms of voltage, size, and specifications as the original.
Your Peugeot 308 keyfob may not function if it was connected to an unrelated vehicle. You might have accidentally given the key fob to a friend or the key was used to unlock other vehicles. This can be solved by reprogramming your key fob using an OBDII scan. The tool will ask you for information about your car, like its VIN or engine type. peugeot 207 new key is important to enter the correct information.